BSIDE Low Current Clamp Meter, DC/AC Amp with Smart Mode, True RMS 6000 Counts Rechargeable Auto-Ranging Multimeter Tester, Measures Temperature Capacitance Diode Duty Cycle Hz Ohm Live Check Voltage

Features: Measure AC/DC current (minimum 10mA by jaws) Measure AC/DC voltage, frequency, resistance and continuity Measure temperature, capacitance, diode, duty cycle and live-wire check Auto range, Auto power off, data hold, low battery indication. Specifications: Display: 6000 counts DC current: 0.01-59.99A 0.01A ±(3.0%+5); 60-200A 0.1A ±(3.0%+8); AC current: 0.01-59.99A 0.01A ±(3.0%+5); 60-200A 0.1A ±(3.0%+8); DC voltage: 0.001-5.999V 0.001V ±(0.8%+3); 6-59.99V 0.01V ±(0.8%+3); 60-599.9A 0.1V ±(1.0%+5); 600-610V 1V ±(1%+5) AC voltage: 0.05-5.999V 0.001V ±(1%+3); 6-59.99V 0.01V ±(1%+3); 60-599.9A 0.1V ±(1.2%+5); 600-610V 1V ±(1.2%+5) Resistance: 0.1-599.9Ω 0.1Ω ±(1.2%+3); 0.6K-5.999KΩ 0.001KΩ ±(1.2%+3); 6K-59.99KΩ 0.01KΩ ±(1.2%+3); 60K-599.9KΩ 0.1KΩ ±(1.2%+3); 0.6M-5.999MΩ 0.001MΩ ±(2%+10); 6M-60MΩ 0.01MΩ ±(2%+10) Capacitance: 0.01µF-5.999µF 0.001µF ±(3.5%+8); 6µF-59.99µF 0.01µF ±(3.5%+8); 60µF-599.9µF 0.1µF ±(3.5%+8); 0.6mF-5.999mF 0.001mF ±(4.5%+10); 6mF-60mF 0.01mF ±(4.5%+10) Frequency:(900mVrms-20Vrms) 1-9.999Hz 0.001Hz ±(2%+10); 10-99.99Hz 0.01Hz ±(2%+10); 100-999.9Hz 0.1Hz ±(2%+10); 1K-9.9KHz 0.001KHz ±(2.5%+12); 10K-99.99KHz 0.01KHz ±(2.5%+12); 100K-999.9KHz 0.1KHz ±(2.5%+12); 1M-9.999MHz 0.001MHz ±(3%+15); Duty Cycle: 10.0%-95.0% 0.1% ±3.0% Buzzer: If the resistance is less than 50Ω, the continuity beeper sounds Temperature: -50℃-0℃ 1℃ ±(2.0%+3); 0℃-50℃ 1℃ ±(1.5%+2); 50℃-1000℃ 1℃ ±(2.0%+3); Diode: Measure diodes within 3V Live Wire Check: Yes Jaw Capacity: 23mm Power: 3.7V 400mA (built-in, rechargeable) Size: 201.3*46.5*30.5mm Weight: 111g Package Includes: 1 x DC AC Clamp Meter 1 x Test Leads 1 x Thermocouple 1 x Charging Cable 1 x Carrying Case 1 x User Manual Tips when Test DC Current with Jaw: The readings will be influenced by earth's magnetic field because the clamp meter is use the Hall effect sensor to detect dc currents. We suggest you measure dc current as the follow suggestions. 1) Zero out the readings before each measurement. 2)Once you zero out the meter, hold the meter in the same orientation when taking readings. Don't tilt it, twist it, or rotate it. Otherwise, changing the orientation of the meter can give false readings due to different magnetic field strengths of the earth when the meter is oriented differently after it's been zeroed. 3) Measures the dc current within 3 seconds, and you will get a accurate results.

• [10mA Resolution]: The sensitivity of this clamp ammeter is 10 mA when measuring AC and DC current with the clamp.
• [Smart Mode]: Digital multimeter can automatically measure ac and dc voltage, resistance and continuity with the best resolution. All of this functions measurement can be done manually as well.
• [Rechargeable]: Low amp clamp meter comes with a rechargeable battery, ensuring that you never have to worry about running out of power during your measurements.
• [Portable but Powerful]: TRMS multimeter can accurately measure AC/DC current, AC/DC voltage, temperature, capacitance, diode, duty cycle, frequency and Live Check. Widely used in diagnoses automotive car parasitic current, HVAC, repairing, troubleshooting industrial and household electrical issues.
• [Color Display]: BSIDE UX2 voltmeter features a large color screen, which greatly enhance your reading experience, you can get the measurement very easy, even in bright sunlight or poor light.
• [Tips when Test DC Current with Jaw]: The readings will be influenced by earth's magnetic field because the clamp meter is use the Hall effect sensor to detect dc currents. We suggest you measure dc current as the follow suggestions. 1) Zero out the readings before each measurement. 2) Once you zero out the meter, hold the meter in the same orientation when taking readings. Don't tilt it, twist it, or rotate it. Otherwise, changing the orientation of the meter can give false readings due to different magnetic field strengths of the earth when the meter is oriented differently after it's been zeroed. 3) Measures the dc current within 3 seconds, and you will get a accurate results.